Products Detail
- Replacement Suggest：
VitalMRO is Authorized Distributor for This Product.
- Size
- 60
- Stroke
- 300 mm
- Stroke reserve
- 0 mm
- Piston rod thread
- M12x1.25
- Reversing backlash
- 100 µm
- Screw diameter
- 12 mm
- Spindle pitch
- 5 mm/U
- Max. angle of rotation of the piston rod +/-
- 1 deg
- Type code
- EPCS
- Mounting position
- Any
- Piston rod end
- External thread
- Motor type
- Stepper motor
- Design
- Electric actuator
with ball screw drive
With integrated drive
- Spindle type
- Ball screw drive
- Symbol
- 00997294
- Protection against torsion/guide
- With plain-bearing guide
- Homing
- Fixed stop block positive
Fixed stop block, negative
Reference switch
- Rotor position sensor
- Absolute encoder, single-turn
- Rotor position sensor measuring principle
- Magnetic
- Additional functions
- User interface
Integrated end-position sensing
- Display
- LED
- Ready status indication
- LED
- Max. acceleration
- 1.5 m/s²
- Max. speed
- 0.09 m/s
- Repetition accuracy
- ±0.02 mm
- Characteristics of digital logic outputs
- Configurable
Not galvanically isolated
- Duty cycle
- 100%
- Insulation protection class
- B
- Max. current of digital logic outputs
- 100 mA
- Max. current consumption
- 5300 mA
- DC nominal voltage
- 24 V
- Nominal current
- 5.3 A
- Parameterization interface
- IO-Link®
User interface
- Rotor position sensor resolution
- 16 bit
- Permissible voltage fluctuations
- +/- 15 %
- Power supply, type of connection
- Plug
- Power supply, connection technology
- M12x1, T-coded as per EN 61076-2-111
- Power supply, number of pins/wires
- 4
- Power supply, connection pattern
- 00995989
- Certification
- RCM compliance mark
- KC characters
- KC EMC
- CE marking (see declaration of conformity)
- As per EU EMC directive
As per EU RoHS directive
- Vibration resistance
- Transport application test with severity level 1 as per FN 942017-4 and EN 60068-2-6
- Shock resistance
- Shock test with severity level 1 as per FN 942017-5 and EN 60068-2-27
- Corrosion resistance class (CRC)
- 0 - No corrosion stress
- Storage temperature
- -20 °C ... 60 °C
- Relative air humidity
- 0 - 90 %
Non-condensing
- Degree of protection
- IP40
- Ambient temperature
- 0 °C ... 50 °C
- Note on ambient temperature
- Above an ambient temperature of 30°C, the power must be reduced by 2% per K.
- Max. torque Mx
- 0 Nm
- Max. torque My
- 6.4 Nm
- Max. torque Mz
- 6.4 Nm
- Max. radial force on actuator shaft
- 230 N
- Max. feed force Fx
- 900 N
- Guide value for payload, horizontal
- 120 kg
- Guide value for payload, vertical
- 46 kg
- Moving mass at 0 mm stroke
- 305 g
- Additional weight per 10 mm stroke
- 69 g
- Basic weight with 0 mm stroke
- 2294 g
- Product weight
- 4364 g
- Additional moving mass per 10 mm stroke
- 6.5 g
- Number of digital logic outputs 24 V DC
- 2
- Number of digital logic inputs
- 2
- Logic input specification
- Based on IEC 61131-2, type 1
- Work range of logic input
- 24 V
- Characteristics of logic input
- Configurable
Not galvanically isolated
- IO-Link®, SIO mode support
- Yes
- IO-Link®, protocol version
- Device V 1.1
- IO-Link®, communication mode
- COM3 (230.4 kBd)
- IO-Link®, port class
- A
- IO-Link®, number of ports
- 1
- IO-Link®, process data width OUT
- 2 Byte
- IO-Link®, process data content OUT
- 1 bit (move in)
1 bit (move out)
1 bit (quit error)
- IO-Link®, process data width IN
- 2 Byte
- IO-Link®, process data content IN
- 1 bit (state device)
1 bit (state move)
1 bit (state in)
1 bit (state out)
- IO-Link®, service data contents IN
- 32 bit force
32 bit position
32 bit speed
- IO-Link®, minimum cycle time
- 1 ms
- IO-Link®, data memory required
- 500 byte
- Max. cable length
- 15 m outputs
15 m inputs
20 m for IO-Link® operation
- Switching logic at outputs
- NPN (negative switching)
PNP (positive switching)
- Input switching logic
- NPN (negative switching)
PNP (positive switching)
- Logic interface, connection type
- Plug
- Logic interface, connection technology
- M12x1, A-coded as per EN 61076-2-101
- Logic interface, number of poles/wires
- 8
- Logic interface, connection pattern
- 00992264
- Type of mounting
- With internal thread
With accessories
- Note on materials
- Contains paint-wetting impairment substances
RoHS-compliant
- Housing material
- Wrought aluminum alloy, smooth-anodized
- Piston rod material
- High-alloy stainless steel
- Spindle nut material
- Steel
- Spindle material
- Roller bearing steel
Authentic Ensure
Complete Selection
Integrity Service
Worldwide Delivery
One To One Service
Comments