VitalMRO is Authorized Distributor for This Product.
| Permission | RCM mark |
| CE certificate (see declaration of conformity) | to EU EMC directive to EU EX protection directive (ATEX) |
| KC-mark | KC-EMV |
| Material information | halogen free RoHs compliant |
| Measurement principle | Magnetoresistive |
| ambient temperature [°C] | -40 to 85 |
| Control output | PNP |
| Switching element function | NO contact |
| Max. output current [mA] | 100 |
| Max. switching capacity DC [W] | 2,8 |
| Short circuit resistance | yes |
| Overload resistant | Available |
| Operating voltage range DC [V] | 5 to 30 |
| Reverse polarity protection | for all electrical connections |
| Electrical connection 1, connection type | cable |
| Electrical connection 1, connection technology | Open end |
| Electrical connection 1, number of pins / wires | 3 |
| Connection outlet direction | along |
| Test conditions line | Biegewechselfestigkeit nach Festo Norm Schleppkette: 5 Millionen Zyklen, Biegeradius 75 mm Torsionsfestigkeit: > 300 000 Zyklen, ±270°/0,1 m |
| Cable length [MTR] | 10,0 |
| Line properties | Standard+cable track |
| Cable sleeve material | TPE-O |
| Fastening type | Insertable from above into the slot Permanently screwed |
| Housing material | PA PP High-alloyed stainless steels |
| Ambient temperature for moving cable placements [°C] | -20 to 85 |
| Protection category | IP65 IP68 IP69K |
| Design | For T-slot |
| Rated operating voltage DC [V] | 24 |
| Product weight [g] | 93,4 |
| Switching status indicator | LED yellow |
| Based on standard | EN 60947-5-2 |
| ATEX gas category | II 3G |
| Ex ignition protection type gas | Ex nA IIC T4 X Gc |
| ATEX dust category | II 3D |
| Ex ignition protection type dust | Ex tc IIIC T120°C X Dc |
| Ex ambient temperature | -40°C <= Ta <= +85°C |
| Special features | kühlschmiermittelbeständig laugenbeständig säurebeständig |
| Measured parameter | Position |
| Repeatability [mm] | 0,2 |
| Switch on time [ms] | <= 1 ms |
| Switch off time [ms] | <= 1 ms |
| Max. switching frequency [hz] | 180 |
| Voltage drop [V] | < 1,5 V |
| Minimum load current [mA] | 0 |
| Residual current [mA] | < 0,05 mA |
| Cable shield colour | Grey |
| Insulation sleeve material | PP |
| Wire ends | Wire end sleeve |
| Max. tightening torque [Nm] | 0,6 |
| installation position | arbitrary |
| Housing colour | black |
| Functional reserve display | LED orange |
| Food compatibility | See expanded material information |
| Weight | 93,4 g / Pcs |
Authentic Ensure
Complete Selection
Integrity Service
Worldwide Delivery
One To One Service
Comments